Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
THERMO SCI 3P AIG PARTS & ACCESSORIES RINSING TUBE SILICONE 2.8X1.
501347612 RINSING TUBE SILICONE 2.8X1.
Accuflow Systems Saint-Gobain Tubing, Biocompatible TPE, 3/8 in ID, 5/8 in OD
Biocompatible TPE tubing designed for sensitive biopharmaceutical fluid transfer and single-use processing. The tubing offers low extractables and absorption, secure aseptic weldability, and compatibility with common sterilization methods, making it suitable for peristaltic pumping, cell culture, and bioreactor process lines.
- Material: biocompatible TPE
- Inner diameter: 3/8 in (9.5 mm)
- Outer diameter: 5/8 in (15.9 mm)
- Wall thickness: 1/8 in (3.2 mm)
- Length per coil: 50 ft (15.2 m)
- Minimum bend radius: 1-1/4 in (31.7 mm)
- Maximum working pressure at 73°F (23°C): 16 psi (1.1 bar)
- Maximum working pressure at 180°F (82°C): 6 psi (0.4 bar)
- Sterilization: autoclave 30 min at 121 °C; ethylene oxide; radiation up to 5 Mrad (50 kGy)
- Durometer hardness: 60 Shore A
- Compliance: certified free of materials of animal origin; documented biocompatibility and extractable testing
Uline Fluorescent Tags - #1, 2 3/4 X 1 3/8", Pre-Wired, Orange
Fluorescent Tags-1 2 3/4X1 3/8IN Pre-Wired Orange
AVANTOR MASTERFLEX (VWR LLC) Cole-Parmer TUBING C-FLEX 3/8 X 5/8", 350Ft
NC0283834 CFLE .375X.625X.125IN 350FT
Accuflow Systems Saint-Gobain Tygon Medical Tubing, Microbore, Non-DEHP, 0.050 in ID
Tygon ND 100-80 medical microbore tubing is a clear, non-DEHP thermoplastic tubing designed for precise small-diameter fluid transfer in medical and laboratory systems. The tubing balances flexibility and dimensional stability for use in infusion lines, catheters, and microfluidic assemblies.
- Inner diameter: 0.050 in (1.27 mm).
- Outer diameter: 0.090 in (2.29 mm).
- Wall thickness: 0.020 in (0.51 mm).
- Length per package: 500 ft.
- Material: non-DEHP thermoplastic (TOTM plasticizer) for reduced phthalate migration.
- Suitable for catheter tubing, intravenous/intra-arterial infusion, cannulas, and protective sheaths.
- Can be thermoformed and flared for fabrication into cannulas and sheaths.
Accuflow Systems Saint-Gobain Tygon Tubing, E-3603, 7/16 In ID, 9/16 In OD, 50 Ft
Saint-Gobain Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tubing engineered for medical, diagnostic, and laboratory fluid-transfer applications. It combines high dimensional tolerance, resistance to flex-fatigue, and a glassy-smooth inner bore to minimize buildup and carryover, while its non-oxidizing, non-contaminating formulation reduces extractables for reliable reagent handling.
- Crystal-clear thermoplastic construction for visual inspection
- 7/16 in (11.1 mm) inside diameter, 9/16 in (14.3 mm) outside diameter
- 1/16 in (1.6 mm) wall thickness, 50 ft (15 m) length
- BPA- and phthalate-free, biocompatible, non-toxic
- Glassy-smooth inner bore resists buildup and reduces carryover
- High dimensional tolerance and resistance to flex-fatigue for reproducible fluid transfer
- Non-oxidizing, non-contaminating formulation minimizes extractables
Accuflow Systems Altafluor 200 FEP (Fluoronated Ethylene Propylene) - 200 FEP, 1/32" X 1/16"- 25 FT
Altafluor 200 FEP (Fluoronated Ethylene Propylene) is an economical choice for applications requiring chemical resistance in combination with broad temperature exposure. Altafluor 200 FEP offers excellent clarity which makes it ideal for sight glass/flow monitoring applications. Certified to NSF 51, NSF 61 and NSF 372. It has superior electrical insulation properties and is available in coiled hose and convoluted tubing constructions. Additionally, the outstanding UV transmission rate of FEP makes it a clear choice for UV transmission applications. Altafluor 200 tubing may be used with flare or conventional fittings.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/8" X 3/16"- 100 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
